Standard Features

• ■ Rigid Meehanite Cast Bed
• ■ Hardened & Ground Bed Ways
• ■ Hardened & Ground Gears in the Head stock
• ■ Inch/Metric Threading (62 Pitch sets)
• ■ Hardened & Ground Cross feed Screw
• ■ Precision Taper roller bearings
• ■ 6” & 8” Back Plate D1-6
• ■ 6” 3 Jaw Chuck, 8” 4 Jaw Chuck
• ■ Steady Rest
• ■ Follow Rest
• ■ Coolant System 1/8 HP
• ■ 4 Way Tool Post
• ■ Rear Splash Guard
• ■ MT4 Center
• ■ Machine Weight 2250 lbs
• ■ Tool Box & Operational Manual
• ■ Floor Space 105 x 34 x 60”
• ■ Foot Pedal Brake
• The Feed rod is equipped with a Over Load Safety Clutch.
  The Apron has a interlock to prevent feeding inter-gearing during half nut threading.

LD Spindle Specifications:

• Mounted on precision taper roller Bearings
• ■ 5 HP Main Spindle Motor - 220 VAC 3 Phase
• ■ Spindle Speeds - 50 2000 RPM 12 steps
• ■ Foot Brake
• ■ Gap Bed
• ■ Heavy Duty Floor Stand
• ■ Power Requirement - 6.5 KVA 3 phase 220 VAC
• ■ Coolant System Standard 1/8 HP
• ■ Rotational Knob Speed Change
• ■ Weight - 1,350 lbs
• ■ Fw/Reverse Lever
• ■ Removable Full Length Splash Guard
•  

Basic Dimensions:

• ■ Swing over bed - 16”
• ■ Swing over gap - 21 3/4”
• ■ Swing over cross slide- 9 1/2”
• ■ Swing over saddle - 8 3/4”
• ■ Cross Slide travel - 6 1/2”
• ■ Distance between centers - 60”
•  

Bed:

• ■ Width of bed ways - 10”
• ■ Top slide travel - 4”
• ■ Cross slide travel - 8”
•  

Spindle:

• ■ Spindle Motor - 5 HP
• ■ Spindle nose mounting - STD: D1-6
• ■ Spindle bore - 2 3/16”
• ■ Spindle nose taper & sleeve - Outer M.T.#6, Inner M.T.#5
• ■ Range of spindle speeds - 12 speed gear change 50 to 2000 rpm
•  

Thread & Feed

• ■ Range of inch threads - 4 to 56 T.P.I (32 kinds)
• ■ Range of metric threads - 0.4 to 7.0 (30 kinds)
• ■ Range of longitudinal feeds - 0.0026” to 0.0638” /rev
• ■ Range of cross feeds - 0.0013” to 0.03919” /rev
•  

Tailstock:

• ■ Quill taper - M.T #4
• ■ Quill travel - 4 3/8”
•