Standard Features

• ■ Rigid Meehanite Cast Bed
• ■ Feed rod overload clutch
• ■ Electronics Cabinet & Schematic Set
• ■ Removable Full Length Splash Guard
• ■ Halogen work lamp
• ■ Hardened & Ground Bed Ways
• ■ Hardened & Ground Gears in the Head stock
• ■ Hardened & Ground Cross feed Screw
• ■ Hardened & Ground Bed Ways
• ■ Precision Taper roller bearings
• ■ Low voltage control unit
• ■ Heavy Duty 1 part stand
• ■ Coolant System 1/8 HP
• ■ 4 Way Tool Post
• ■ (1) Back plate for 3 jaw chuck
• ■ Inch/Metric Threading & gear sets
• ■ Full length foot brake
• ■ Tool Box & Operational Manual
• ■ Machine Weight - 7,300 lbs
• ■ Floor Space 58 x 25 x 48”
•  

Machine Specifications: KC-2140

• ■ Z travel - 78.8”
• ■ Swing Over the Bed - 24.8”
• ■ Swing Over Saddle - 7 5/8”
• ■ Swing over Gap - 31.9”
• ■ Bed Length - 88”
• ■ Cross Slide Travel (X) - 12.9”
• ■ Swing Over Cross Slide - 17.7”
• ■ Width of Bed ways - 13.78”
• ■ Compound Rest Travel - 5.9”
• ■ Hardened & Ground Screws
• ■ Feed stop has over load safety
• ■ Full Length Foot Brake
•  

Thrading Specifications:

• ■ Leadscrew Diameter & Pitch - 7/8” X 4 T.P.I
• ■ Cross Feed Range - 0.0011 - 0.0173”
• ■ Metric Pitch Threads- 24 kinds, 0.05 - 7mm
• ■ Module Pitch - 16 kinds, 0.25 – 3.5mm
• ■ Range of Long. feeds - 0.06-0.88 mm/rev
• Feed stop has over load safety
• ■ Longitudinal Feed - 0.0023 – 0.0346
• ■ Inch Pitch - 36 kinds, 4 – 56 TPI
• ■ DP Pitch - 36 kinds, 8 –112 P
• ■ Range of cross fds - 0.03-0.44 mm/rev
•  

Tail Stock:

• ■ Quill Diameter - 2.6”
• ■ Quill Taper - MT#5
• ■ Height of center - 12.4”
• ■ Tail Stock Travel - 5.9”
• Tailstock Barrel w/Inch & Metric Graduations
•  

KC Spindle:

• 7.5 HP Main Spindle Motor 220 VAC 3 Phase
• ■ Spindle Gears 85mm -
  L 27-125
  M 126-490
  H= 491-2250
• ■ Spindle Gears 105mm -
  L 20-92
  M 93-330
  H= 331-1500
• ■ Spindle Gears 155mm -
  L 10-52
  M 53-175
  H= 176-800
• ■ Spindle bore - 3.34” SB Optional = 4.13” & 5.9”
• ■ Spindle bore taper - Outer M.T.#7
• Fwd/Reverse Lever
• ■ Spindle Nose - D1-8 Camlock
• ■ Spindle speeds - 18 Speeds
• ■ Tapers - MT7 & MT5 A2-11
• ■ Spindle inner taper - M.T. #5
• Taper Bearings Support the Spindle
• We also offer this machine group in the EV series. Infinitely variable spindle speeds utilizing a Delta digital inverter, providing continuously variable spindle speeds & the heavy duty machining power. The (3) gear changes are done automatically improving tool life & part finish.
•  

Power Requirements

• ■ Input Power - 208-230 VAC 3 Phase 25 KVA
• ■ Way Oil - Mobil Vectra #2
• ■ Area - Changes 30+ Bed L x 30” D x 58” H
•